|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
R5322N SERIES 120mA 2ch LDO REGULATORS NO.EA-077-0606 OUTLINE The R5322N Series are voltage regulator ICs with high output voltage accuracy, low supply current, low dropout, and high ripple rejection by CMOS process. Each of these voltage regulator ICs consists of a voltage reference unit, an error amplifier, resistors for setting Output Voltage, a current limit circuit, and a chip enable circuit. These ICs perform with low dropout voltage due to built-in transistor with low ON resistance, and a chip enable function and prolong the battery life of each system. The line transient response and load transient response of the R5322N Series are excellent, thus these ICs are very suitable for the power supply for hand-held communication equipment. The output voltage of these ICs is internally fixed with high accuracy. Since the package for these ICs is SOT-23-6W package, and include 2ch LDO regulators each, high density mounting of the ICs on boards is possible. FEATURES * * * * * * * * * * * Ultra-Low Supply Current.............................................. Typ. 75A (VR1, VR2) Standby Current ............................................................ Typ. 0.1A (VR1, VR2) Output Voltage ..............................................................1.5V to 4.0V Low Dropout Voltage..................................................... Typ. 0.15V (IOUT=100mA ,VOUT=3.0V) High Ripple Rejection ................................................... Typ. 75dB (f=1kHz) High Output Voltage Accuracy ......................................2.0% Low Temperature-Drift Coefficient of Output Voltage.... Typ. 100ppm/C Excellent Line Regulation ............................................. Typ.0.05%/V Small Packages .......................................................... SOT-23-6W Built-in chip enable circuit (A/B: active high) Built-in fold-back protection circuit ................................ Typ. 40mA (Current at short mode) APPLICATIONS * Power source for cellular phones such as GSM, CDMA and various kinds of PCS. * Power source for electrical appliances such as cameras, VCRs and camcorders. * Power source for battery-powered equipment. 1 R5322N BLOCK DIAGRAMS R5322NxxxA CE1 1 6 VOUT1 Error Amp. Vref Current Limit R1_1 R2_1 VDD 2 R1_2 Error Amp. Vref 5 GND R2_2 Current Limit CE2 3 4 VOUT2 R5322NxxxB CE1 1 6 VOUT1 Error Amp. Vref Current Limit R1_1 R2_1 VDD 2 R1_2 Error Amp. Vref Current Limit 5 GND R2_2 CE2 3 4 VOUT2 2 R5322N SELECTION GUIDE The output voltage, mask option, and the taping type for the ICs can be selected at the user's request. The selection can be made with designating the part number as shown below; R5322Nxxxx-xx-x Part Number ab cd Code Contents a b c d Setting combination of 2ch Output Voltage (VOUT) : Serial Number for Voltage Setting, Stepwise setting with a step of 0.1V in the range of 1.5V to 4.0V is possible for each channel. Designation of Mask Option : A Version: without auto discharge function at OFF state. B Version: with auto discharge function at OFF state. Designation of Taping Type : Ex. TR (refer to Taping Specifications; TR type is the standard direction.) Designation of Composition of pin plating. -F : Lead free plating 3 R5322N PIN CONFIGURATION 6 SOT-23-6W 5 4 VOUT1 GND VOUT2 (mark side) CE1 VDD CE2 1 2 3 PIN DESCRIPTIONS * SOT-23-6W Pin No Symbol Pin Description 1 2 3 4 5 6 CE1 VDD CE2 VOUT2 GND VOUT1 Chip Enable Pin 1 Input Pin Chip Enable Pin 2 Output Pin 2 Ground Pin Output Pin 1 ABSOLUTE MAXIMUM RATINGS Symbol Item Rating Unit VIN VCE VOUT IOUT1 IOUT2 PD Topt Tstg Input Voltage Input Voltage (CE Pin) Output Voltage Output Current 1 Output Current 2 Power Dissipation (SOT-23-6W) * Operating Temperature Range Storage Temperature Range Note1 6.5 -0.3 to VIN + 0.3 -0.3 to VIN + 0.3 V V V mA mA mW C C 130 130 430 -40 to 85 -55 to 125 Note1: For Power Dissipation please refer to PACKAGE INFORMATION to be described. 4 R5322N ELECTRICAL CHARACTERISTICS * R5322NxxxA/B Topt=25C Symbol Item Conditions Min. x0.98 Typ. Max. x1.02 Unit VOUT IOUT VOUT/IOUT Output voltage Output Current Load regulation Dropout Voltage Supply Current Supply Current (Standby) Line regulation VIN=Set VOUT+1V, 1mA < IOUT < 30mA = = VIN-VOUT=1.0V V mA mV 120 VDIF ISS Istandby VOUT/VIN VIN=Set VOUT+1V, 12 40 1mA < IOUT < 120mA = = Refer to the ELECTRICAL CHARACTERISTICS by OUTPUT VOLTAGE VIN=Set VOUT+1V VIN=VCE=Set VOUT+1V Set VOUT+0.5V VIN 6.0V IOUT=30mA (In case that VOUT < 1.6, = 2.2V < VIN < 6.0)) = = f=1kHz,Ripple 0.5Vp-p, VIN=Set VOUT+1V,IOUT=30mA 2.2 IOUT=30mA -40C < Topt = VOUT=0V 1.5 1.5 0.0 BW=10Hz to 100kHz VCE=0V 30 70 < = < = < = 75 0.1 0.05 150 1.0 0.20 A A %/V RR VIN VOUT/ Topt Ripple Rejection Input Voltage Output Voltage Temperature Coefficient Short Current Limit CE Pull-down Resistance CE Input Voltage "H" CE Input Voltage "L" Output Noise Low Output Nch Tr. ON Resistance (of B version) 75 6.0 100 dB V ppm /C mA 16.0 VIN 0.3 M V V Vrms 85C Ilim RPD VCEH VCEL en RLOW 40 4.0 * Electrical Characteristics by Output Voltage Output Voltage VOUT (V) Dropout Voltage VDIF(V) Condition Typ. Max. 1.5V 1.7V 1.9V 2.1V 2.8V < = < = < = < = < = VOUT < 1.6V VOUT < 1.8V VOUT < 2.0V VOUT < 2.7V VOUT < 4.0V IOUT = 120mA 0.36 0.30 0.28 0.24 0.18 0.70 0.50 0.45 0.40 0.30 5 R5322N TYPICAL APPLIATION IN C1 3 CE2 VOUT2 4 R5322N Series 2 VDD GND 5 1 CE1 OUT2 C3 VOUT1 6 C2 OUT1 (External Components) Output Capacitor; Tantalum Type 6 R5322N TEST CIRCUIT 3 CE2 VOUT2 4 R5322N Series 2 VDD GND 5 C3 VOUT2 V IOUT2 ISS A IOUT1 VOUT2 4 R5322N Series 2 VDD GND 5 3 CE2 C3 C1 1 CE1 VOUT1 6 C2 VOUT1 V C1 1 CE1 VOUT1 6 C2 C1= Tantal 1.0F C2= C3=Tantal 2.2F Fig.1 Standard test Circuit C1= 1.0F C2= C3=2.2F Fig.2 Supply Current Test Circuit VOUT2 4 R5322N Series 2 VDD GND 5 Pulse Generator 3 CE2 C3 IOUT2 VOUT2 4 R5322N Series 2 VDD GND 5 3 CE2 C3 IOUT2a IOUT2b IOUT1b IOUT1a C2 PG 1 CE1 VOUT1 6 C2 IOUT1 C1 1 CE1 VOUT1 6 C2= C3=2.2F Fig.3 Ripple Rejection, Line Transient Response Test Circuit C1= 1.0F C2= C3=2.2F Fig.4 Load Transient Response Test Circuit 7 R5322N TYPICAL CHARACTERISTICS 1) Output Voltage vs. Output Current 1.5V (VR1) 1.6 Output Voltage VOUT(V) 1.6 1.5V (VR2) VIN=2.0V 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.00 0.05 0.10 0.15 0.20 0.25 0.30 VIN=1.8V VIN=3.5V VIN=2.5V VIN=2.0V 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.00 VIN=1.8V VIN=3.5V VIN=2.5V 0.10 0.20 0.30 Output Current IOUT(A) Output Voltage VOUT(V) 1.4 Output Current IOUT(A) 2.8V (VR1) 3.0 3.0 VIN=3.1V VIN=3.3V VIN=4.8V 1.5 1.0 0.5 0.0 0.00 0.05 0.10 0.15 0.20 0.25 0.30 VIN=3.5V 2.8V (VR2) Output Voltage VOUT(V) 2.5 2.0 1.5 1.0 0.5 0.0 0.00 0.05 0.10 0.15 0.20 0.25 0.30 VIN=3.5V VIN=3.1V VIN=3.3V VIN=4.8V Output Voltage VOUT(V) 2.5 2.0 Output Current IOUT(A) Output Current IOUT(A) 4.0V (VR1) 4.5 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0.00 0.05 0.10 0.15 0.20 0.25 0.30 VIN=5.0V VIN=4.3V VIN=4.5V VIN=6.0V 4.0V (VR2) 4.5 Output Voltage VOUT(V) Output Voltage VOUT(V) 4.0 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0.00 0.05 VIN=4.3V VIN=4.5V VIN=6.0V VIN=5.0V 0.10 0.15 0.20 0.25 0.30 Output Current IOUT(A) Output Current IOUT(A) 8 R5322N 2) Output Voltage vs. Input Voltage 1.5V (VR1) 1.6 1.6 1.5V (VR2) Output Voltage VOUT(V) 1.5 1.4 1.3 IOUT=1mA 1.2 1.1 1.0 1 2 3 4 IOUT=30mA IOUT=50mA Output Voltage VOUT(V) 1.5 1.4 1.3 IOUT=1mA 1.2 1.1 1.0 1 2 3 4 IOUT=30mA IOUT=50mA 5 6 5 6 Input Voltage VIN(V) Input Voltage VIN(V) 2.8V (VR1) 2.9 2.9 2.8V (VR2) Output Voltage VOUT(V) 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.0 1 2 3 4 IOUT=1mA IOUT=30mA IOUT=50mA 5 6 Output Voltage VOUT(V) 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.0 1 2 3 4 IOUT=1mA IOUT=30mA IOUT=50mA 5 6 Input Voltage VIN(V) Input Voltage VIN(V) 4.0V (VR1) 4.2 4.2 4.0V (VR2) Output Voltage VOUT(V) 4.0 3.8 3.6 3.4 3.2 3.0 1 2 3 4 IOUT=1mA IOUT=30mA IOUT=50mA 5 6 Output Voltage VOUT(V) 4.0 3.8 3.6 3.4 3.2 3.0 1 2 3 4 IOUT=1mA IOUT=30mA IOUT=50mA 5 6 Input Voltage VIN(V) Input Voltage VIN(V) 9 R5322N 3) Dropout Voltage vs. Temperature 1.5V (VR1) 1.00 1.00 1.5V (VR2) Dropout Voltage VDIF(V) Topt=85C 25C -40C Dropout Voltage VDIF(V) 0.80 0.60 0.40 0.20 0.00 Topt=85C 25C -40C 0.80 0.60 0.40 0.20 0.00 0 20 40 60 80 100 120 0 20 40 60 80 100 120 Output Current IOUT(mA) Output Current IOUT(mA) 2.8V (VR1) 0.40 0.40 2.8V (VR2) Dropout Voltage VDIF(V) 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0 20 40 60 80 100 120 Topt=85C 25C -40C Dropout Voltage VDIF(V) 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0 20 Topt=85C 25C -40C 40 60 80 100 120 Output Current IOUT(mA) Output Current IOUT(mA) 4.0V (VR1) 0.40 4.0V (VR2) 0.40 Dropout Voltage VDIF(V) 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0 20 Dropout Voltage VDIF(V) 0.35 Topt=85C 25C -40C 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0 20 Topt=85C 25C -40C 40 60 80 100 120 40 60 80 100 120 Output Current IOUT(mA) Output Current IOUT(mA) 10 R5322N 4) Output Voltage vs. Temperature 1.5V (VR1) 1.54 VIN=2.5V IOUT=30mA 1.54 1.53 1.52 1.51 1.50 1.49 1.48 1.47 1.46 -50 -25 0 25 50 75 100 1.53 1.52 1.51 1.50 1.49 1.48 1.47 1.46 -50 -25 0 25 50 75 100 1.5V (VR2) VIN=2.5V IOUT=30mA Output Voltage VOUT(V) Temperature Topt(C) Output Voltage VOUT(V) Temperature Topt(C) 2.8V (VR1) 2.86 VIN=3.8V IOUT=30mA 2.86 2.8V (VR2) VIN=3.8V IOUT=30mA Output Voltage VOUT(V) 2.84 2.82 2.80 2.78 2.76 2.74 -50 -25 0 25 50 75 100 Output Voltage VOUT(V) 2.84 2.82 2.80 2.78 2.76 2.74 -50 -25 0 25 50 75 100 Temperature Topt(C) Temperature Topt(C) 4.0V (VR1) 4.08 VIN=5.0V IOUT=30mA 4.08 4.0V (VR2) VIN=5.0V IOUT=30mA Output Voltage VOUT(V) 4.04 4.02 4.00 3.98 3.96 3.94 3.92 -50 -25 0 25 50 75 100 Output Voltage VOUT(V) 4.06 4.06 4.04 4.02 4.00 3.98 3.96 3.94 3.92 -50 -25 0 25 50 75 100 Temperature Topt(C) Temperature Topt(C) 11 R5322N 5) Supply Current vs. Input Voltage 1.5V 100 100 2.8V Supply Current ISS(A) Supply Current ISS(A) 80 60 40 VR1 20 VR2 0 0 1 2 3 4 5 6 80 60 40 VR1 20 VR2 0 0 1 2 3 4 5 6 Input Voltage VIN(V) Input Voltage VIN(V) 4.0V 100 Supply Current ISS(A) 80 60 40 VR1 20 VR2 0 0 1 2 3 4 5 6 Input Voltage VIN(V) 6) Supply Current vs. Temperature 1.5V (VR1) 100 VIN=2.5V 1.5V (VR2) 100 Supply Current ISS(A) VIN=2.5V Supply Current ISS(A) 80 60 40 20 0 -50 80 60 40 20 0 -50 0 50 100 0 50 100 Temperature Topt(C) Temperature Topt(C) 12 R5322N 2.8V (VR1) 100 VIN=3.8V 100 2.8V (VR2) VIN=3.8V Supply Current ISS(A) Supply Current ISS(A) 80 60 40 20 0 -50 80 60 40 20 0 -50 -25 0 25 50 75 100 -25 0 25 50 75 100 Temperature Topt(C) Temperature Topt(C) 4.0V (VR1) 100 VIN=5.0V 100 4.0V (VR2) VIN=5.0V Supply Current ISS(A) 80 60 40 20 0 -50 Supply Current ISS(A) 50 75 100 80 60 40 20 0 -50 -25 0 25 -25 0 25 50 75 100 Temperature Topt(C) Temperature Topt(C) 7) Dropout Voltage vs. Set Output Voltage VR1 0.70 VR2 0.70 Dropout Voltage VDIF(V) IOUT=10mA 30mA 50mA 120mA Dropout Voltage VDIF(V) 0.60 0.50 0.40 0.30 0.20 0.10 0.00 1.0 2.0 0.60 0.50 0.40 0.30 0.20 0.10 0.00 1.0 2.0 IOUT=10mA 30mA 50mA 120mA 3.0 4.0 3.0 4.0 Output Voltage VOUT(V) Output Voltage VOUT(V) 13 R5322N 8) Ripple Rejection vs. Frequency 1.5V (VR1) 90 Ripple Rejection RR(dB) 1.5V (VR2) 90 VIN=2.5V+0.5Vp-p COUT=tantal 1.0F Topt=25C VIN=2.5V+0.5Vp-p COUT=tantal 1.0F Topt=25C Ripple Rejection RR(dB) 80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100 80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100 Frequency f(kHz) Frequency f(kHz) 1.5V (VR1) 90 VIN=2.5V+0.5Vp-p COUT=tantal 2.2F Topt=25C 90 1.5V (VR2) VIN=2.5V+0.5Vp-p COUT=tantal 2.2F Topt=25C Ripple Rejection RR(dB) Ripple Rejection RR(dB) 80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100 80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100 Frequency f(kHz) Frequency f(kHz) 2.8V (VR1) 90 VIN=3.8V+0.5Vp-p COUT=tantal 1.0F Topt=25C 2.8V (VR2) 90 Ripple Rejection RR(dB) VIN=3.8V+0.5Vp-p COUT=tantal 1.0F Topt=25C Ripple Rejection RR(dB) 80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100 80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100 Frequency f(kHz) Frequency f(kHz) 14 R5322N 2.8V (VR1) 90 VIN=3.8V+0.5Vp-p COUT=tantal 2.2F Topt=25C 90 2.8V (VR2) VIN=3.8V+0.5Vp-p COUT=tantal 2.2F Topt=25C Ripple Rejection RR(dB) 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100 Ripple Rejection RR(dB) 80 80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100 Frequency f(kHz) Frequency f(kHz) 4.0V (VR1) 90 VIN=5.0V+0.5Vp-p COUT=tantal 1.0F Topt=25C 90 4.0V (VR2) VIN=5.0V+0.5Vp-p COUT=tantal 1.0F Topt=25C Ripple Rejection RR(dB) Ripple Rejection RR(dB) 80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100 80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100 Frequency f(kHz) Frequency f(kHz) 4.0V (VR1) 90 VIN=5.0V+0.5Vp-p COUT=tantal 2.2F Topt=25C 90 4.0V (VR2) VIN=5.0V+0.5Vp-p COUT=tantal 2.2F Topt=25C Ripple Rejection RR(dB) Ripple Rejection RR(dB) 80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100 80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100 Frequency f(kHz) Frequency f(kHz) 15 R5322N 9) Ripple Rejection vs. Input Voltage (DC bias) 2.8V (VR1) 100 COUT=tantal 2.2F IOUT=1mA 100 2.8V (VR2) COUT=tantal 2.2F IOUT=1mA Ripple Rejection RR(dB) Ripple Rejection RR(dB) 80 60 40 20 0 2.9 80 60 40 20 0 2.9 f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 3.3 f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 3.3 Input Voltage VIN(V) Input Voltage VIN(V) 2.8V (VR1) 100 COUT=tantal 2.2F IOUT=30mA 100 2.8V (VR2) COUT=tantal 2.2F IOUT=30mA Ripple Rejection RR(dB) 80 60 40 20 0 2.9 Ripple Rejection RR(dB) 80 60 40 20 0 2.9 f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 3.3 f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 3.3 Input Voltage VIN(V) Input Voltage VIN(V) 2.8V (VR1) 100 COUT=tantal 2.2F IOUT=50mA 2.8V (VR2) 100 Ripple Rejection RR(dB) COUT=tantal 2.2F IOUT=50mA Ripple Rejection RR(dB) 80 60 40 20 0 2.9 80 60 40 20 0 2.9 f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 3.3 f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 3.3 Input Voltage VIN(V) Input Voltage VIN(V) 16 R5322N 10) Input Transient Response R5322N001x (2.8V, VR1) 2.84 IOUT=30mA COUT=tantal 1.0F tr/tf=5s Topt=25C Input Voltage 6.0 Output Voltage VOUT(V) 2.82 2.81 Output Voltage 2.80 2.79 2.78 0 10 20 30 40 50 Time t(s) 60 70 80 90 4.0 3.0 2.0 1.0 0.0 100 R5322N001x (2.8V, VR1) 2.84 IOUT=30mA COUT=tantal 2.2F tr/tf=5s Topt=25C Input Voltage 6.0 Output Voltage VOUT(V) 2.82 2.81 Output Voltage 2.80 2.79 2.78 0 10 20 30 40 50 Time t(s) 60 70 80 90 4.0 3.0 2.0 1.0 0.0 100 R5322N001x (2.8V, VR1) 2.84 IOUT=30mA COUT=tantal 6.8F tr/tf=5s Topt=25C Input Voltage 6.0 Output Voltage VOUT(V) 2.82 2.81 Output Voltage 2.80 2.79 2.78 0 10 20 30 40 50 Time t(s) 60 70 80 90 4.0 3.0 2.0 1.0 0.0 100 Input Voltage VIN(V) 2.83 5.0 Input Voltage VIN(V) 2.83 5.0 Input Voltage VIN(V) 2.83 5.0 17 R5322N R5322N001x (2.8V, VR2) 2.84 Input Voltage IOUT=30mA COUT=tantal 1.0F tr/tf=5s Topt=25C 6.0 Output Voltage VOUT(V) 2.82 2.81 Output Voltage 2.80 2.79 2.78 0 10 20 30 40 50 Time t(s) 60 70 80 90 4.0 3.0 2.0 1.0 0.0 100 R5322N001x (2.8V, VR2) 2.84 Input Voltage IOUT=30mA COUT=tantal 2.2F tr/tf=5s Topt=25C 6.0 Output Voltage VOUT(V) 2.82 2.81 Output Voltage 2.80 2.79 2.78 0 10 20 30 40 50 Time t(s) 60 70 80 90 4.0 3.0 2.0 1.0 0.0 100 R5322N001x (2.8V, VR2) 2.84 IOUT=30mA COUT=tantal 6.8F tr/tf=5s Topt=25C Input Voltage 6.0 Output Voltage VOUT(V) 2.82 2.81 2.80 2.79 2.78 0 10 20 30 40 50 Time t(s) 60 70 80 90 Output Voltage 4.0 3.0 2.0 1.0 0.0 100 18 Input Voltage VIN(V) 2.83 5.0 Input Voltage VIN(V) 2.83 5.0 Input Voltage VIN(V) 2.83 5.0 R5322N 11) Load Transient Response R5322N001x (VR1=2.8V) IOUT=50mA 100mA VIN=3.8V CIN=tantal 1.0F COUT=tantal 1.0F tr/tf=5s Topt=25C 3.00 2.95 2.90 2.85 2.80 2.75 2.70 2.80 2.75 -2 VOUT1 150 IOUT1 VOUT2 0 2 4 6 8 Time t(s) 10 IOUT2=30mA 12 14 16 18 R5322N001x (VR1=2.8V) IOUT=50mA 100mA VIN=3.8V CIN=tantal 1.0F COUT=tantal 2.2F tr/tf=5s Topt=25C 3.00 2.95 2.90 2.85 2.80 2.75 2.70 2.80 2.75 -2 VOUT1 150 IOUT1 VOUT2 0 2 4 6 8 Time t(s) 10 IOUT2=30mA 12 14 16 18 R5322N001x (VR1=2.8V) 3.00 2.95 2.90 2.85 2.80 2.75 2.70 2.80 2.75 -2 VOUT1 IOUT=50mA 100mA VIN=3.8V CIN=tantal 1.0F COUT=tantal 6.8F tr/tf=5s Topt=25C IOUT1 150 VOUT2 0 2 4 6 8 Time t(s) 10 IOUT2=30mA 12 14 16 18 Output Current IOUT1(mA) Output Voltage VOUT(V) 100 50 0 Output Current IOUT1(mA) Output Voltage VOUT(V) 100 50 0 Output Current IOUT1(mA) Output Voltage VOUT(V) 100 50 0 19 R5322N R5322N001x (VR2=2.8V) 3.00 2.95 2.90 2.85 2.80 2.75 2.70 2.80 2.75 -2 0 2 4 6 8 Time t(s) 10 12 14 16 18 VOUT1 IOUT1=30mA IOUT=50mA 100mA VIN=3.8V CIN=tantal 1.0F COUT=tantal 1.0F tr/tf=5s Topt=25C IOUT2 150 VOUT2 R5322N00x (VR2=2.8V) 3.00 2.95 2.90 2.85 2.80 2.75 2.70 2.80 2.75 -2 0 2 4 6 8 Time t(s) 10 12 14 16 18 VOUT1 IOUT1=30mA IOUT=50mA 100mA VIN=3.8V CIN=tantal 1.0F COUT=tantal 2.2F tr/tf=5s Topt=25C IOUT2 150 VOUT2 R5322N00x (VR2=2.8V) IOUT=50mA 100mA VIN=3.8V CIN=tantal 1.0F COUT=tantal 6.8F tr/tf=5s Topt=25C 3.00 2.95 2.90 2.85 2.80 2.75 2.70 2.80 2.75 -2 0 2 4 6 8 Time t(s) 10 12 14 16 18 VOUT1 IOUT1=30mA 150 IOUT2 VOUT2 20 Output Current IOUT2(mA) Output Voltage VOUT(V) 100 50 0 Output Current IOUT2(mA) Output Voltage VOUT(V) 100 50 0 Output Current IOUT2(mA) Output Voltage VOUT(V) 100 50 0 R5322N TECHNICAL NOTES When using these ICs, consider the following points: In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For this purpose, be sure to use a 2.2F or more capacitance COUT with good frequency characteristics and ESR (Equivalent Series Resistance) of which is in the range described as follows: The relations between IOUT (Output Current) and ESR of Output Capacitor are shown below. The conditions when the white noise level is under 40V (Avg.) are marked as the hatched area in the graph. (Note: When a ceramic capacitor is connected to the Output Pin as Output capacitor for phase compensation, the operation might be unstable unless as much as 1W resistor is connected between the capacitor and GND instead of ESR. Test these ICs with as same external components as ones to be used on the PCB.) R5322N001x (VR1=2.8V) 100 CIN=Ceramic 1.0F COUT=Ceramic 2.2F 100 R5322N001x (VR1=2.8V) CIN=Ceramic 2.2F COUT=Ceramic 2.2F 10 10 ERS1() ERS1() 1 1 0.1 0.1 0.01 0 20 40 60 80 100 120 0.01 0 20 40 60 80 100 120 Output Current IOUT1(mA) Output Current IOUT1(mA) 21 R5322N R5322N001x (VR2=2.8V) 100 CIN=Ceramic 1.0F COUT=Ceramic 2.2F 100 R5322N001x (VR2=2.8V) CIN=Ceramic 2.2F COUT=Ceramic 2.2F 10 10 ERS2() ERS2() 1 1 0.1 0.1 0.01 0 20 40 60 80 100 120 0.01 0 20 40 60 80 100 120 Output Current IOUT2(mA) Output Current IOUT2(mA) * Make VDD and GND line sufficient. When the impedance of these is high, the noise might be picked up or not work correctly. * Connect the capacitor with a capacitance of 1F or more between VDD and GND as close as possible. * Set external components, especially Output Capacitor, as close as possible to the ICs and make wiring shortest. 22 PACKAGE INFORMATION PE-SOT-23-6W-0512 * SOT-23-6W Unit: mm PACKAGE DIMENSIONS 2.90.2 1.90.2 (0.95) (0.95) 1.1 +0.2 -0.1 0.80.1 4 6 5 1.80.2 2.80.3 0 to 0.1 1 2 0.15 TAPING SPECIFICATION 0.30.1 1.5 0 +0.1 4.00.1 2.00.05 1 2.0MAX. 2 3 4.00.1 3.3 1.10.1 TR User Direction of Feed TAPING REEL DIMENSIONS (1reel=3000pcs) 11.41.0 9.00.3 20.5 0 180 -1.5 +1 60 0 210.8 130.2 3.2 8.00.3 6 5 4 3.50.05 1.750.1 0.2 MIN. +0.1 0.4 -0.2 +0.1 -0.075 PACKAGE INFORMATION PE-SOT-23-6W-0512 POWER DISSIPATION (SOT-23-6W) This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board. This specification is based on the measurement at the condition below: Measurement Conditions Standard Land Pattern Environment Board Material Board Dimensions Copper Ratio Through-hole Measurement Result (Topt=25C,Tjmax=125C) Mounting on Board (Wind velocity=0m/s) Glass cloth epoxy plactic (Double sided) 40mm x 40mm x 1.6mm Top side : Approx. 50% , Back side : Approx. 50% 0.5mm x 44pcs Standard Land Pattern Power Dissipation Thermal Resistance 600 430mW ja=(125-25C)/0.43W=233C/W Power Dissipation PD(mW) 500 430 400 300 On Board 40 100 0 0 25 50 75 85 100 Ambient Temperature (C) 125 150 Power Dissipation 40 200 Measurement Board Pattern IC Mount Area Unit : mm RECOMMENDED LAND PATTERN (SOT-23-6W) 0.7 MAX. 1.0 0.95 0.95 1.9 2.4 (Unit: mm) MARK INFORMATION ME-R5322N-0310 R5322N SERIES MARK SPECIFICATION * SOT-23-6W 1 3 1 2 3 4 , , 2 4 : Product Code (refer to Part Number vs. Product Code) : Lot Number * Part Number vs. Product Code Product Code 1 2 Part Number R5322N001B-TR R5322N002B-TR R5322N003B-TR R5322N004B-TR R5322N005B-TR R5322N001A-TR R5322N002A-TR R5322N003A-TR R5322N006B-TR R5322N007B-TR R5322N008B-TR R5322N009B-TR R5322N010B-TR H H H H H H H H H H H H H 0 1 2 3 4 5 6 7 8 9 A B C |
Price & Availability of R5322N009B-TR |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |